Configuring EAP-TLS Authentication / Configuring EAP-TLS for Cisco ACS and ISE
Parent topic: Configuring EAP-TLS for Cisco ACS and ISE

Installing a New Cisco ACS Certificate

To install a New Cisco ACS Certificate in the ACS web interface, perform the following:
  1. Select System Configuration>ACS Certificate Setup>Install ACS Certificate.
  2. Click one of the following:
    • Read the certificate from a file—Specify the full path of the certificate file in the Certificate File field.
      Note: The certificate file refers to the Server Certificate file. If you are using Vocera Manufacturer Certificates, the certificate file is server_cert.pem.
    • Use a specified certificate from storage—Type the Common Name (CN) of the certificate in the Certificate CN field.
    • Certificate from Storage—Check the Select Certificate from Storage box, and then select a certificate from the list.
  3. In the Private Key File field, type the full path of the private key file.
    Note: The private key file refers to the Server Private Key file. If you are using Vocera Manufacturer Certificates, the private key file is server_key.pem.
  4. In the Private Key Password field, type the private key password.
    If you are using Vocera Manufacturing Certificates, contact Vocera Technical Support to obtain the private key password.
  5. Click Submit.
Parent topic: Configuring EAP-TLS for Cisco ACS and ISE

This guide last modified: 2019-02-11 01:38.  .   http://www.vocera.com