Configuring Microsoft IAS for WPA-PEAP / Configuration Overview
Parent topic: Configuration Overview

Configuring Your Badge For WPA-PEAP

To configure the Vocera Badge for WPA-PEAP, perform the following:

Ensure that your badge is logged in to the Vocera Voice Server before changing the settings. Update the badge first with your existing settings and then update the access point with WPA-PEAP settings.

  1. Start the Badge Properties Editor.
  2. Select B3000n for Badge Type.
  3. Enter the SSID on the General tab, that will be used for WPA-PEAP.
  4. Enter the Vocera Server IP Address.
  5. Click Security.
  6. Select WPA-PEAP for Authentication.
  7. Enter User Name and Password that you created in Active Directory.
    The username should include the domain, for example, mydomain\vocera.
  8. Click Apply.
  9. Select B3000 for Badge Type.
  10. On General and Security, specify the same property settings for B3000 that you specified for B3000n.
  11. Click OK.
  12. Stop and start the Vocera Voice Server for these properties to take affect.
Parent topic: Configuration Overview

This guide last modified: 2019-02-11 01:38.  .   http://www.vocera.com