This guide last modified:
2019-02-11 01:38.
.
| Wi-Fi LAN Vendor Settings | |
The recommended values for Aruba access points are listed in this topic.
| Settings | Recommended Value |
|---|---|
| Minimum Controller Code | 6.1.3 Note: Aruba Controller Code 6.3 and below does not support IGMP
V3.
|
| Role | Voice |
| ARM | Enabled if honoring maximum and minimum transmit power levels. |
| Voice Aware Scanning | Enabled |
| Tx Data Rates |
2.4 GHz—6, 9, 11, 12, 18, 24 5 GHz—Data rates change depending on the site |
| Probe Retry | Disabled |
| Max Tx Failure | 25 |
| Session ACL | vocera-acl |
| Mcast-rate-opt (needed for multicast to go at highest rate) | Enabled |
| Multicast Filters—Use the Aruba Policy Enforcement Firewall (PEF) to configure these multicast filters to block traffic. |
netdestination HSRP Host 224.0.0.2 netdestination VRRP host 224.0.0.18 netdestination RIP host 224.0.0.9 netdestination OSPF host 224.0.0.5 host 224.0.0.6 netdestination PIM host 224.0.0.13 netdestination EIGRP host 224.0.0.10 |
This guide last modified:
2019-02-11 01:38.
.