Adding your Access Points as RADIUS Clients in IAS

To add an access point as RADIUS client, perform the following :

1. Choose Start>All Programs>Administrative Tools>Internet Authentication Service.
2. Right-click RADIUS Clients, and choose New RADIUS Client.
3. Type a name and the IP address of your access point, and click Next.
4. Select RADIUS Standard for most access points or set Client-Vendor as appropriate.
5. Type in a shared secret password to be used between the RADIUS server and the access point.
   Note: Ensure to remember this password, because you will have to configure this on the access point also.
6. Click Finish.