When you use the Badge Configuration Utility, you download
property values that specify how a badge connects to your network and the way it behaves when
it is connected. If one or more of these values are incorrect, you can restore all the factory
default settings and configure the badge again. After you restore factory default settings on
the badge, it automatically connects to the machine running the Badge Configuration Utility when it powers up.
-
Display the badge configuration menu.
-
Scroll down and select the RESET DEFAULTS menu item.
The screen displays a confirmation menu.
-
Select YES - RESET!
Any existing badge property values are erased, and the factory default values are
restored. The badge reboots and tries to connect to the configuration computer at the IP
address 10.0.0.1.
Note: If the Badge Configuration Utility is running, the badge
automatically downloads the current property values when it reboots. If you are not
ready to download properties, make sure you exit the Badge Configuration Utility before resetting the badge
defaults.
-
When you see the Vocera splash screen, remove the battery from the badge.
