Wi-Fi LAN Vendor Settings
Parent topic: Wi-Fi LAN Vendor Settings

Fortinet/Meru Networks

Vendor specific WLAN settings and best practices that apply to the Meru Networks/Fortinet are listed in this topic.

Setting Recommended Value
Badge Roaming Policy 1
IGMP Snooping Enable
Multicast setting Configure UDP Broadcast Port 5555 for Badge Discovery for Meru.
QoS Rules Enable QoS Rules 7 and 8. It is enabled by default.Separate for Vocera
SSID Separate for Vocera
Virtual Port Disable
Note: Vocera recommends that you do not use Virtual Port.
Virtual Cell 1 Enable only if no native cell option
Vocera Location Feature Disable Virtual Cell or divide APs into zone.
1 A Transmit Power Asymmetry problem may arise at the edges of Virtual Cell coverage if the transmit power of an AP is higher than the Vocera device (~30mW). To avoid poor audio at the edges of the Virtual Cell, the RSSI of the Vocera device on the AP must be verified. The Vocera device should never drop below an RSSI of -75dBm.
Parent topic: Wi-Fi LAN Vendor Settings

This guide last modified: 2025-02-25 08:48.  .   http://www.vocera.com