Step 2: Configuring the Printer

Follow the instructions below to configure the printer using the NETira CT application.

1. Start the NETira CT application
2. Connect the printer to the computer via mini USB cable. Make sure the printer is plugged in and turned on.
3. In NETira, select Update Available Connections For Printer from the drop down menu.
   Note:

   A window will pop up with the status for connection.

   

4. After it completes, select Tools>USB VIRTUAL COM --> COM4 from the drop down menu. Then immediately go to Step 5.

   

5. Select Tools>Set Input Mode to DPL. Click Yes to continue on the dialog box that displays.

   

6. Load the printer configuration file - Select File>Open and browse for the .cfg file. Select the file and click Open.

   

7. Load the configuration from the printer - Select Tools> Query Printer Configuration.

   

8. Select WIFI. Click the Include column next to ESSID. Enter your wifi network name in the ESSID field.
9. Click Pass Phrase and enter your wifi password.
10. Click Send. It will take about one minute for the printer to restart with the new wireless settings.

11. After the printer restarts, there should be a solid white Wifi symbol on the front of the printer to indicate connection.
12. Get the IP address assigned by the DHCP server by selecting Wireless General Network. This is the IP that will go in Clinical Manager’s label printer setup.

    

13. Lastly, select Tools>Set Input Mode.

    

14. Select ZPL and click Done.