Quick test for C1000

If you suspect that a C1000 Minibadge is not working properly, you can run the Quick Test utility to diagnose possible problems. Vocera recommends that you run the Quick Test before contacting Vocera Technical Support to report a problem with the badge.

To perform a Quick Test, following the steps:

1. Remove the battery from the Minibadge, then insert it again.

   The Minibadge vibrates.

2. Press and hold both the Hold/DND and Panic buttons during boot stage 2 and 3.

   The device enunciates "Entering Quick test mode."

3. Navigate to the required submenu and use the following button options:
   • Volume Down — To transition to the next option.
   • Volume UP — To go back to the previous option.
   • Call — To select the option.
   • Pressing any button — To stop enunciation immediately.

   The Quick Test utility tests badge features in the following sequence:

   • Button test
   • LED test
   • Audio test
   • Syntiant test
   • Accerolmeter test
   • Vibrator test
   • WiFi and Bluetooth test
   • Battery test
   • Charger test
   • NAND test