This topic describes the default ports configured in the Mirth channel.
The below table lists the default ports that are configured in the Mirth channel:
Table 1. Default Ports in Mirth Channel
Channel |
Port |
Description |
HL7Receiver |
8889 |
To receive HL7 data from Mindray eGateway. |
HL7Receiver |
6666 |
To send data to JSONReceiver via load balancer. |
JSONReceiver |
6666 |
To receive data from HL7Receiver channel. |
Monitor |
6661 |
The load balancer will ping to this port. |
Note: Perform the following steps in load balancer to achieve high availability:
- Create monitor with TCP and port as 6661 for each of the CWE server.
- Create service with port 6666 and IP address of CWE server for each of the CWE
server. Include the corresponding monitor in it.
- Create virtual service with port 6666 and add both the services. Verify the order of
services added (CWE 1, CWE 2).
- Similarly create two services with port 8889 and IP address of the respective CWE
server. Include the corresponding monitor in it.
- Create virtual service with port 8889 and add both the services. Verify the order of
services added (CWE 2, CWE 1).
For more information, see the load balancer configuration document.