Line Settings

In order for a SpectraLink device to register with Vocera Platform, the device must be registered to a Session Initiation Protocol (SIP) server.

Register the SpectraLink device to a SIP server in the Simple Setup section of the Web Configuration Utility, found in the main menu bar.
Note: The same Line Settings can be accessed by selecting Settings from the main menu bar and clicking on Lines or SIP in the drop-down menu. However, only the first line of each SpectraLink device will be registered with the Vocera Platform.
Note: SIP server settings vary widely, based upon the individual configurations. Therefore, Vocera Platform cannot provide exact values for SIP server settings or determine all information settings that might be required. Values shown in this document are for demonstration purposes only. Contact your IT professional or a SpectraLink representative for more information on SIP server settings.
Note: The number that should receive messages must be configured for Line 1 in order for that phone to receive messages.
  1. Select Simple Setup in the SpectraLink Web Configuration Utility menu bar.

    The Simple Setup page displays.

  2. Expand the SIP Server section of the screen. There are two fields, Address and Port, that must be configured.
    SIP Server Configuration Field Description
    Address Enter the IP address of the SIP server with which the phone is registered.
    Port Enter the port that the phone uses to access the SIP server for phone registration.
    The configuration file XML strings associated with these settings are as follows:
    XML String Description
    Address voIpProt.server.1.address
    Port voIpProt.server.1.port
  3. Expand the SIP Line Identification section. There are five fields that must be configured.
    SIP Line Setting Description
    Display Name Enter the name or number that will be used as the phone's caller ID. This information appears at the top of the phone screen display.
    Address Enter the line number for the phone. This number must match the line number that is registered with the SIP server.
    Authentication User ID Enter the user name used to authenticate this line registration with the SIP Server. Depending upon the SIP Server configuration utilized, this field may not be required.
    Authentication Password Enter the password used to authenticate this line registration with the SIP Server. Depending upon the SIP Server configuration utilized, this field may not be required.
    Label Enter the text that will display next to the associated line key. If a label is not defined, the label will be derived from the user part of the address. This field is optional
    The configuration file XML strings associated with these settings are as follows:
    XML String Description
    Display Name reg.1.displayName
    Address reg.1.address
    Authentication User ID reg.1.auth.userId
    Authentication Password reg.1.auth.password
    Label reg.1.label