Register the SpectraLink device to a SIP server in the
Simple Setup section of the Web Configuration Utility, found
in the main menu bar.
Note: The same Line Settings can be accessed by selecting Settings
from the main menu bar and clicking on Lines or
SIP in the drop-down menu. However, only the first line
of each SpectraLink device will be registered with the Vocera Platform.
Note: SIP server settings vary widely, based upon the individual
configurations. Therefore, Vocera Platform
cannot provide exact values for SIP server settings or determine all information
settings that might be required. Values shown in this document are for demonstration
purposes only. Contact your IT professional or a SpectraLink representative for more
information on SIP server settings.
Note: The number that should receive
messages must be configured for Line 1 in order for that phone to receive
messages.