Charging the B3000n or B3000 battery

Follow the instruction provided in this topic to charge your battery.

1. Use your thumb to press the battery latch and lift it up, and then remove the battery.
   
   
   
2. Insert the battery into the charger, and press down on the battery until you see the blue indicator light turn on.

      

   If battery capacity exceeds 80%, the blue indicator light will turn off after a second.

   The green indicator light on the front of the charger will begin to blink when the battery is positioned correctly, and it will continue to blink while the battery is charging. When the indicator glows steadily, the battery is fully charged. Charging normally takes only a few hours.

3. Remove the battery from the charger.
4. Slide the pegs at the top of the battery into the two holes in the battery compartment of the battery.

   
   

   
   

5. Press down gently to seat the battery in the badge.